
Add to Cart
High Performance Electric Butterfly Valve For Flow Control Wafer Type On Off
OVERVIEW
In the majority of cases, our extensive range of Thermoplastic Butterfly Valves can be direct mounted with Pneumatic (DA or SR) or Electric Actuators (12vDC, 24vAC, 24vDC, 110vAC 240vAC). Where direct mounting is not possible, a bracket and extended drive adapter are used.
Thermoplastic valves are usually mounted with corrosion resistant plastic (polyamide) Pneumatic Actuators but they can also be supplied with Rilsan (nylon 11) coated aluminium or 316 Stainless Steel.
In addition to pneumatic actuators, a full range of accessories is also available such as Limit Switches, Pilot Solenoid Valves (Namur & remote mounted), Pneumatic or Electro-Pneumatic Positioner
FEATURES
• Wide size range (DN 50…DN600)
• For On-Off or Modulating Control
• The handwheel assembly manual adjustment
• Irreversible worm gear.
• Visual mechanical position indicator for accurate visual reference of valve position.
• Anti-condensation heater and 2 aux. limit switches on standard model
• Enclosure IP67
SPECIFICATIONS:
Table (1) Control Type and Valve Size Data
The below table is based on differential pressure of 10 bar.
Valve | Model | Model | Model | Model | Torque | Run Time | Power | Manual | Kvs |
Size | (On-Off) | Actuator | (Modulating) | Actuator | (Nm) | at 60Hz | (Watts) | Override | (m3/h) |
(sec) | |||||||||
DN50 | VA16-50-O1 | AK-O1 | VA16-50-M1 | AK-M1 | 50 | 11 | 10 | / | 109 |
DN65 | VA16-65-O1 | AK-O1 | VA16-65-M1 | AK-M1 | 50 | 11 | 10 | / | 177 |
DN80 | VA16-80-O1 | AK-O1 | VA16-80-M1 | AK-M1 | 50 | 11 | 10 | / | 243 |
DN100 | VA16-100-O2 | AK-O2 | VA16-100-M2 | AK-M2 | 100 | 18 | 40 | Hand-wheel | 483 |
DN125 | VA16-125-O2 | AK-O2 | VA16-125-M2 | AK-M2 | 100 | 18 | 40 | Hand-wheel | 822 |
DN150 | VA16-150-O3 | AK-O3 | VA16-150-M3 | AK-M3 | 200 | 18 | 40 | Hand-wheel | 1270 |
DN200 | VA16-200-O3 | AK-O3 | VA16-200-M3 | AK-M3 | 200 | 28 | 40 | Hand-wheel | 2550 |
DN250 | VA16-250-O4 | AK-O4 | VA16-250-M4 | AK-M4 | 400 | 28 | 120 | Hand-wheel | 4342 |
DN300 | VA16-300-O6 | AK-O6 | VA16-300-M6 | AK-M6 | 650 | 34 | 120 | Hand-wheel | 6708 |
DN350 | VA16-350-O7 | AK-O7 | VA16-350-M7 | AK-M7 | 1000 | 45 | 180 | Hand-wheel | 9793 |
DN400 | VA16-400-O8 | AK-O8 | VA16-400-M8 | AK-M8 | 1500 | 45 | 220 | Hand-wheel | 13467 |
DN450 | VA16-450-O9 | AK-O9 | VA16-450-M9 | AK-M9 | 2000 | 56 | 180 | Hand-wheel | 17836 |
DN500 | VA16-500-O10 | AK-O10 | VA16-500-M10 | AK-M10 | 3500 | 58 | 220 | Hand-wheel | 22933 |
DN600 | VA16-600-O10 | AK-O10 | VA16-600-M10 | AK-M10 | 3500 | 58 | 300 | Hand-wheel | 35431 |
Figure (1) Product Identification System
The labeling system is as follows:
Table (2) Valve Dimensions (mm) and Weight
Size | L1 | L2 | 4-Ø2 | 4-Ø3 | Øb | D1 | D2 | D3 | K×K | H3 | H2 | H1 | Weight (Kg) | |
DN | Inch | |||||||||||||
50 | 2” | 42 | 32 | 22 | 4-7 | 50 | 125 | 96.5 | 72 | 15 | 130 | 70 | 2.36 | |
65 | 2.5” | 45 | 47 | 22 | 4-7 | 50 | 145 | 110 | 72 | 11×11 | 15 | 142 | 80 | 2.5 |
80 | 3” | 45 | 65 | 23 | 4-7 | 50 | 160 | 124 | 72 | 11×11 | 26 | 155 | 92 | 2.84 |
100 | 4” | 52 | 91 | 27 | 4-10 | 70 | 180 | 158 | 92 | 14×14 | 26 | 170 | 107 | 4.41 |
125 | 5” | 55 | 112 | 25 | 4-10 | 70 | 210 | 187 | 92 | 14×14 | 26 | 190 | 121 | 6.1 |
150 | 6” | 56 | 146 | 24 | 4-10 | 70 | 240 | 214 | 92 | 17×17 | 26 | 210 | 134 | 7.46 |
200 | 8” | 61 | 194 | 24 | 4-12 | 70 | 295 | 266 | 125 | 17×17 | 30 | 243 | 170 | 12.2 |
250 | 10” | 66 | 242 | 31 | 4-12 | 102 | 355 | 325 | 125 | 22×22 | 30 | 282 | 208 | 19.35 |
300 | 12” | 77 | 192 | 32 | 4-14 | 102 | 410 | 380 | 150 | 22×22 | 30 | 307 | 240 | 28.1 |
350 | 14” | 77 | 325 | 34 | 4-14 | 125 | 470 | 422 | 150 | 27×27 | 36 | 345 | 265 | 39 |
400 | 16” | 87 | 380 | 30 | 4-18 | 140 | 525 | 473 | 175 | 36×36 | 40 | 377 | 297 | 58 |
450 | 18” | 105 | 428 | 32 | 4-18 | 140 | 585 | 526 | 175 | 36×36 | 40 | 412 | 331 | 72 |
500 | 20” | 130 | 474 | 33 | 4-22 | 165 | 650 | 577 | 210 | 46×46 | 50 | 440 | 361 | 128 |
600 | 24” | 152 | 573 | 36 | 4-18 | 254 | 770 | 693 | 300 | 46×46 | 50 | 562 | 459 | 178 |
Table (3a)Actuator Dimensions (mm)
OS# | A | B | C | D | E | F | G | M |
O1 | 114 | 8 | 115 | 155/185 | 14×14×15 | 50 | M6·12 | 60 |
With Modulating Card D=185
No mechanical stops
Table (b) Actuator Dimensions(mm)
Table (c) Actuator Dimensions(mm)
AK-O7 to AK-O12
OS# | A | B | C | D | E | F | G | M |
O7,8,9 | 180 | 325 | 230 | 475 | 36×36×40 | 125 | M12·45 | 180 |
O10,12 | 300 | 450 | 230 | 475 | 54×54×72 | 165 | M18·50 | 300 |